*** Critical for all TowerRAID user, you are putting your data at risk if you don’t fix it. In the worst case scenario, the partition will be corrupted. You may able to recover all of the files with recovery software but they can’t recognized the original filenames. You has been warned*** The Sansdigital TowerRAID Enclosure I…
After doing a lot of research , I finally decided to purchase Sansdigital TowerRAID. The reasons I choose to purchased Sansdigital TowerRAID. Big fan – bigger fan is always the better because it’s much quiet, having better air flow to cool down the HDDs. Using standard Flex PSU so I can easily replaced it with a…
I was curious about what nand flash memory chip it was using so I decided to tear the label up. WOW, SpecTek Grade B flash.
I had bought a SANWA CD772 Multimeter a few years ago. However, the reading is always inaccuracy. In order to make sure everything go smooth. I sent an e-mail to Sanwa and asked for a service manual. According to the Service manual, the calibration of the DVC required a 350mV DC input into the meter. …
Makita DC18RC T Charger (120V modded to 220V) In order to MOD it into 220V, 1)Replace TVR 10241 with TVR 10471 2)Replace 220V CAP with 400V 330uF Back of the 120V charger Let’s open it up Fused is 250V rated and we don’t need to replace it Components that we…
I had disassembled two of my ORICO 3529rus3 HDD enclosure and want to share with all of you.